ATI AT2000
Series
ATI AT2002
ATI AT2003
ATI AT2004
ATI AT2005
ATI AT2006
ATI AT2007
2 to 7 Channels - 200 Watts/Channel
ATI’s “Pure Balance”®
technology introduces a range of models that feature true differential
design; balanced from input to output. This design allows the quietest and
purest reproduction of the audio signal. Power output is
200 Watts
RMS/channel into 8 ohms from 20Hz to 20kHz with no
more than 0.03% THD and I.M. distortion. The AT2000
is available in 2 to 7 channel configurations and is upgradeable by adding
200 Watt
power modules. Each model comes standard with 2 massive toroidal
transformers with quick connect plugs.
See below for additional features common to all ATI models:
| Remote Trigger: |
Activated from 3.3VDC to 24 VDC via a
heavy-duty relay |
| Protection Circuits: |
Optically –coupled with full automatic
reset. |
| Toroid Transformers: |
40% more efficient than EI type. Separate
bi-filar windings for each channel guaranty lower noise and crosstalk. |
| Circuit Boards: |
Double-sided, FR-4 glass-epoxy,
computer-grade boards are assembled in-house. |
| Soft Start Circuitry: |
Ultra soft turn on reduces in-rush current
to a minimum. Multiple units can be turned on without tripping circuit
breakers eliminating the need for sequencing. |
| Power Transistors: |
High-current, bi-polar output transistors
with active bias circuits result in effortless operation. |
| Power Cord: |
Detachable, 3-wire cord,
15 amp circuit. |
| 7-Year Warranty |
Parts and labor against defects in parts
or workmanship. |
| Dimensions: |
17"w X 7"h X 17"d (chassis)
weight - 50 to 95lbs (model dependent) |
Models:
AT2002 - 2 channels, 200 watts/channel
AT2003 - 3 channels, 200 watts/channel
AT2004 - 4 channels, 200 watts/channel
AT2005 - 5 channels, 200 watts/channel
AT2006 - 6 channels, 200 watts/channel
AT2007 - 7 channels, 200 watts/channel
Models may be upgraded to a maximum of 7 channels, by
having additional amplifier modules installed within the unit.
Made In The U.S.A.
The U.S. has always led the world in power amplifier technology, and still
does. All ATI products are manufactured in Southern California in a modern
50,000 square-foot facility to exacting design specifications and rigid
quality control. ATI manufactures all toroid transformers and assembles
all circuit boards in-house. We use computerized Audio Precision test
equipment to test each stand-alone amplifier module (DMC2) as well as the
completed unit. This control and scrutiny of every phase of manufacturing
guarantees unit-to-unit repeatability and a lifetime of accurate sound
reproduction.
Power amp specification sheet
Click here for FREE Owner's Manual
Click here for FREE full line ATI Catalog |
